AC Power Sources Elgar and California Instruments Power Products Products | Support | Contact | News Sales Worldwide

California Instruments P Series : Specifications Controller Type Programmable Controls Digital Encoders Readout Voltage 4 digit LCD Readout Freqency and Current 4 digit LCD Non Volatile Setups (with Option -232) 8 Output Model 801P 1001P 1251P AC Power 810 VA 1000 VA 1250 VA Voltage Range Low 0-135 V(L-N) 0-135 V(L-N) 0-135 V(L-N) Range High 0-270 V(L-N) 0-270 V(L-N) 0-270 V(L-N) Accuracy @ 50/60 Hz ± 1 % FS ± 1 % FS ± 1 % FS Accuracy @ 40 Hz ± 2 % FS ± 2 % FS ± 2 % FS Resolution 0.1 V 0.1 V 0.1 V Line & Load Regulation lo range ± 1 % FS ± 1 % FS ± 1 % FS Line & Load Regulation hi range ± 0.5 % FS ± 0.5 % FS ± 0.5 % FS Total Harmonic Distortion @ 50/60 Hz < 0.55 % typical < 0.55 % typical < 0.55 % typical Output Noise < 0.1 V typical < 0.1 V typical < 0.1 V typical Frequency (specifications valid from 45 Hz to 500 Hz) Range 16 - 500 Hz 16 - 500 Hz 16 - 500 Hz Accuracy ± 0.02 % ± 0.02 % ± 0.02 % Resolution below 100 Hz 0.1 Hz 0.1 Hz 0.1 Hz Resolution above 100 Hz 1 Hz 1 Hz 1 Hz Current Current - Steady State lo range 6.0 ARMS 7.4 ARMS 9.2 ARMS Current - Steady State hi range 3.0 ARMS 3.7  ARMS 4.6 ARMS Peak Current lo range 17.8 A 22.2 A 27.6 A Peak Current hi range 8.9 A 11.1 A 13.8 A         Protection Current limit Mode Programmable Current limit Resolution 0.1 ARMS Over Temperature yes Over Voltage yes Input Model 801P 1001P 1251P Line Voltage 2 wire + GND 100 - 240 ±10 % VRMS 100 - 240 ±10 % VRMS 100 - 240 ±10 % VRMS Input Current <15 ARMS < 15 ARMS < 20 ARMS Line Frequency 47 - 63 Hz 47 - 63 Hz 47 - 63 Hz Holdup Time 20 ms 20 ms 20 ms Power Factor > 0.95 typical > 0.95 typical > 0.95 typical Measurements Model 801P 1001P 1251P Current Range 0.0 - 10.0 ARMS 0.0 - 10.0 ARMS 0.0 - 10.0 ARMS Current Accuracy ± 0.2 ARMS ± 0.2 ARMS ± 0.2 ARMS Current Resolution 0.1 A 0.1 A 0.1 A Voltage Range 0 - 278 V 0 - 278 V 0 - 278 V Voltage Resolution (requires Option -232) 1 (below 250 V) V 1 (below 250 V) V 1 (below 250 V) V Remote Control Option -232 Interface type RS232C Baud rate 9600 Command Language SCPI Physical Dimensions inches HxWxD 8.25 x 8.5 x 17.5 Dimensions mm HxWxD 210 x 216 x 445 Weight 30 lbs / 13.6 kg Operating Temp. 0 - 40 ° C * Specifications are warranted over an ambient temperature range of 0 to 40 °C and apply after a 30 minute warmup period.     AC Electronic Loads AC Modular Supply Discontinued Products Product Support Contact Sales     Service Agreement for all California Instruments AC except MX & FCS

Copyright © 2010 AMETEK Inc. Privacy Phone: 858-450-0085